Discharge to Maxmimise export

[joelegg]

hi all,

I'm simply trying to force my battyer (currently at 100%) to discharge to grid using these settings But i cannot get it to do that.

It charged fine under max self consumption today. I've not been able to get it to dischhage on demand tho.

what could I be doing wrong?

Thank you

[joelegg]

i have changed this so export is not limited to and it still doesn't work (site control limit disabled)

[zh17home]

I got Reactive Power Mode : RRCR

[joelegg]

Oh is that the settiig i should enable to export to grid from battery ?

[laba0072]

HI joelegg,
can you change all values shown on the advance power control panel?
I'm not able to make changes even if advance power control is enabled.
How did you set Storage Discharge Limit to 11400w ?

My home battery show these values:

I would like to change the Max Discharge Power & Peak Discharge Power.
I think that Storage Discharge Limit and Max Discharge Power is same...?

kind regards,
laba0072

[joelegg]

i dont actually touch these at all as they dont seem to do anything - the battery manages this itself it seems. i'm not entirely sure sorry

[WillCodeForCats]

Those are nameplate (info) values from the battery. They are read only.

[laba0072]

The values of my screenshot above are read only values.

The document “Technical Note – Power Control Protocol for
SolarEdge Inverters” shows it.

The value “Remote Control Command Discharge Limit” is a R/W value.
Need to find a way to set this to 3000w

[WillCodeForCats]

Look for entity like number.solaredge_i1_storage_charge_limit and number.solaredge_i1_storage_discharge_limit where iX is the inverter ID number.

[laba0072]

Thanks.
I installed the v3.1.0-pre.3. Now I can change storage_discharge_limit by simply unsing the dashboard.

Now set to 3000w.

Thanks Seth for coding all this.