sdkconfig.defaults.esp32

# This file was generated using idf.py save-defconfig. It can be edited manually.
# Espressif IoT Development Framework (ESP-IDF) 5.2.2 Project Minimal Configuration
#
CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16
CONFIG_PARTITION_TABLE_CUSTOM=y
CONFIG_ETH_USE_SPI_ETHERNET=n
CONFIG_HTTPD_MAX_REQ_HDR_LEN=1024
CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP=n
CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM=64
CONFIG_ESP_WIFI_EXTRA_IRAM_OPT=y
CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE=n
CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM=1
CONFIG_FREERTOS_HZ=1000
CONFIG_LWIP_LOCAL_HOSTNAME="DroneBridgeESP32"
CONFIG_LWIP_IRAM_OPTIMIZATION=y
CONFIG_LWIP_MAX_SOCKETS=16
CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744
CONFIG_LWIP_TCP_WND_DEFAULT=5744
CONFIG_MQTT_PROTOCOL_311=n
CONFIG_MQTT_TRANSPORT_SSL=n
CONFIG_WS_TRANSPORT=n
CONFIG_IDF_EXPERIMENTAL_FEATURES=y
CONFIG_DB_SKYBRUSH_SUPPORT=y
CONFIG_DB_GENERIC_BOARD=y
CONFIG_BT_ENABLED=y
CONFIG_BT_NIMBLE_ENABLED=y
CONFIG_BT_CONTROLLER_ENABLED=y
CONFIG_BT_NIMBLE_LOG_LEVEL_ERROR=y
CONFIG_BT_NIMBLE_LOG_LEVEL_INFO=n
CONFIG_BT_NIMBLE_NVS_PERSIST=y
CONFIG_ETH_USE_ESP32_EMAC=n
CONFIG_ETH_ENABLED=n
# BLE & WiFi co-existance fill up the IRAM on the ESP32 classic
CONFIG_ESP_WIFI_EXTRA_IRAM_OPT=n
CONFIG_ESP_WIFI_RX_IRAM_OPT=n
CONFIG_RINGBUF_PLACE_FUNCTIONS_INTO_FLASH=y
CONFIG_RINGBUF_PLACE_ISR_FUNCTIONS_INTO_FLASH=y
CONFIG_SPI_MASTER_ISR_IN_IRAM=n